
Small problems become big ones quickly. A slightly loose stone falls out in the gym. A weakened chain link snaps completely. The golden rule: when in doubt, go straight to the jeweler. A skilled professional can spot problems you haven’t noticed yet.
A goldsmith solders the break seamlessly — when done well, the repair is virtually invisible. Very fine chains (snake, box chains) require specialist handling.
If loose, your jeweler tightens the prongs or re-seats the setting. If missing, they’ll source a matching replacement. Always bring the piece and the stone if it’s already come out.
Most solid gold rings can be resized 1–3 sizes in either direction. Rings with continuous pave settings or engravings may have limitations — ask us upfront.
Spring rings and lobster clasps wear out over time. A matched replacement is a quick fix — this is a good time to upgrade to a more secure closure.
Years of wear leave micro-scratches and dullness. For white gold, rhodium re-plating refreshes the bright silver surface. Once or twice a decade is enough.
It seems like a quick fix — but super glue seals settings and joints, making professional repair far more difficult and expensive. Bring it to us instead.
A basic chain link repair starts from around €15–30. More complex repairs can cost €50–100 or more depending on the piece.
Yes — most solid gold rings can be resized 1–3 sizes. Rings with continuous stone settings may have some limitations, which we’ll advise on.
If you hear a faint rattle when you tap the stone, or it visibly wobbles, go to your jeweler immediately before the stone falls out.